Aluminum Coil/Foil for Pharmaceutical Caps

Black Colored Coated Aluminum Coil Foil for Pharmaceutical Caps

Yinhe supplies coated aluminium to manufacturers of Pharmaceutical seals for injectable products, vial caps, tear-off and pilfer-proof caps.

Product Introduction

Yinhe supplies coated aluminium to manufacturers of Pharmaceutical seals for injectable products, vial caps, tear-off and pilfer-proof caps. In the pharmaceutical sector, aluminium caps protect the essential features of the products and preserve them from humidity, oxygen and microbiological contaminants.

Coated aluminium can be used in the pharmaceutical sector thanks to its properties: sterilization resistance, perfect printability, excellent isotropy. More than this aluminum has excellent resistance to corrosion.

Our company offers: FDA approved epoxy coating resistant to degreasing through chlorinated degreaser and sterilisation in water vapour at 121°C for 30 minutes or in oven at 180°C for 90 minutes.

Yinhe cares about Sustainability.

We continuously improve the resource optimization to increase production efficiency. We work hard to reduce consumption of water, energy and paper to control and limit emissions and effectively manage harmful substances and waste.


Product NameCoated Aluminum Foil/Coil
Alloy8011
TemperH14, H16
Thickness0.15mm ~ 0.3mm
Width26mm ~1200mm
Diameter300mm ~ 1500mm
Coil ID76/152 mm
Tensile Strength135~165MPA
Elongation> 2.5%
Earring Rate< 2%

Surface
Be free from Oil Stain, Dent, Inclusion, Scratches,
Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks,
Dirt Streaks and other defect which will interfere with use.
Test ItemsAutoclave resistance / Isopropanol / Ethanol / Hgcl2 / Rigid test /ect
ApplicationClosures, Caps, Vial Seals, especially for Pharmaceutical industry
MOQ3 tons
CertificationISO9001,SGS,FDA


Black Color Coated Aluminum Coil

Black Color Coated Aluminum Coil